Bitmain released the AntMiner S4 recently amid much speculation and the simultaneous release of their HashNest cloud mining antminer. It uses the state of the art BM chip powered by the 28nm tech process with Hey everyone, Enjoy the майнер peek into my basement.
I wanted to show everyone how the Antminer S4 sounds in a normal house and not a datacenter. The Antminer S4 is an enormously powerful and efficient bitcoin miner. Right now BTCGuild works the best. Ghash and eligius work but not up to full speed with the newest firmware. We were not able to get it to work well with P2Pool.
NastyPool gave me the best results at roughly 1. The driver needs to be fixed to майнер better compatibility and currently ckolivas of cgminer is working on better cgminer results but is encouraging Bitmain to fix their driver. The Antminer S4 pulls watts at the wall while running antminer 1.
The Antminer S4 does not ship with a power cable. Lesser cables will melt down and can ruin your miner not to mention your fuse box.
The S4 also stays much cooler than the Antminer S2 did using a better fan and blade arrangement. Internal blade temps run between 45 to 49 degrees Celsius at an ambient temp of 39c.
The firmware driver issue limits antminer pools you can run on with optimal performance. This issue can cause some issues for those running on P2Pool сайт производителя antminer s9. Design features bitcoin-miner Antminer S4: Antminer S4 is made in standard sizes, designed for server rack 3U, so that externally this miner looks very simple: The design of the miner майнер to remove two side and top cover, which is quite enough for full access to the filling of the device.
Everything is already connected and ready for full-fledged antminer. The only thing you need is майнер power cord, which is not standard, but even if it were available, you probably would not get a cable with a suitable plug.
Inside the case there are 4 processor boards installed in two rows майнер on top of the others. Each board carries on itself 40 chips BM, made on 28nm technical process. There is a micro sd card on the black board, plz insert it tightly. Майнер is the picture showing the sd card: If the hashing power seems to be affected, antminer check your PSU and wiring and reboot and check the status a few times. We have encountered such issue when testing, antminer are some "x" showing on the ASIC chip status, like the following picture showing: Then, we restarted the miner, and the "x" disappeared. Antminer Antminer S4 Bitcoin Miner.