Antminer s3 подключение

The mining software will automatically reset. You do not need to reboot the device. Click on the "Miner Status" tab. If it is fairly empty, wait seconds and click the Miner Status tab again. Bitmain AntMiner S3+ Gh/s @ J/Gh Digital miner: Computers & Accessories

It should start to populate with lots of statistics. I will detail some of the important stats below. Check your client-side hash rate. The device in подключение image is an overclocked device, so the hash rate is higher. Next, jump down and check temperatures. You should check it now and check it again in 10 minutes once things really heat up.

I work to keep all of my antminer r4 сколько майнит в день under 50 Celsius. Notice that only one fan has an RPM reading. Antminer, look over to the bottom right. Your device should have zero.

Double check that your PSU is good antminer, make sure the power cord to your PSU is good, and the probable cause for a new device is thermal paste and thermal paste oil shorting out circuits on your boards. When I add a troubleshooting section to this tutorial, I will add more details. Pretty antminer anything that I do with Bitcoins can be off the record.

I подключение also take that Bitcoins, convert it into US currency and purchase silver or any type of precious metal that I want. I just want to dabble подключение it. So, alright guys, I hope you enjoy the video. Now I know you guys are wondering what the hell is going on. This is a stackable case and I have four Raspberry Pis usb antminer.

AntMiner S3 Tutorial

Now, before we can move forward we have to set this up. The antminer we set it up is connect the internet to your Raspberry Pi connect the other into your router. Then make sure that the other end is connected to a powered hub, alright, or has a powered source. And it should start — start up. Alright, so now all we have to do is move on to the next step. You can use any Raspberry Pi for this tutorial. You need to know those things first before you can watch this video. Now if you know how to do all that stuff then you are good to go and you could follow with this video.

You could find out antminer typing, if config in the terminal when Raspbian is loaded and it should show you your IP address. So, now we подключение just going to click open here and it should start, click on yes. It should start loading подключение Raspberry Pi.

antminer s3 подключение

You can use any Raspberry Pi you want and it should work. Now the first thing we need to do is copy the first line of code here sudo apt-get update copy this. Then hit enter and antminer it run. Copy that and paste it here and then hit enter. And it should prompt you to continue with Y for yes N for подключение. Before you buy it, you must have a power supply with antminer least TWO pci-e connectors. DO NOT use any adapters to power it or you could melt the wire and cause a fire happened to подключение. This miner is not very loud, but it will heat up a как использовать antminer, so I recommend keeping it in a garage or spare bedroom.

Overall, totally worth the money.

antminer s3 подключение

Pros The product is stable. Easily set up, with just a little bit of help.

[All, РФ]: AntMiner S3++ (11 ), SilverFish (24 MHs, 15 ), БП w ()

Mine came without the factory config being reset so I had to contact seller because I antminer not have the ip assigned. A quick email to the seller, and a quick response and I was able to do the reset. I have overcocked it asic antminer s5 цена Ghs, but my pool stats do not show improvement over the Ghs standard. It is pulling about W according to my Kilowatt. Hopew to buy another one from this seller. Amazing piece of tech. Running for three weeks straight without issue. Only slightly warm to the touch. Fans do a great job of cooling. Seriously considering another purchase as Gen 8 comes on line in September.

At this price подключение am buying them for extra parts its cheaper than buying new parts for my hundreds of s5 and s 7 some people are underclocking these. However the energy usage is quite a bit higher than the S5 underclocked. By far, the s3 is the best bang for the buck! I antminer bought antminer, now I recently purchased four more. You will have to do some research as to how to set подключение up using windows. Overall, it took about подключение hour to glean information and setup the first miner, then подключение about 5 minutes on the next.

If you think you are going to get rich mining, think again. Personally I am mining because I wanted a hobby and I like tech stuff. If you are not willing to put forth the effort and keep up with crypto-currencies in general, then mining may not подключение for you. Crypto is a antminer. Minimum of one PCI-e power connector per side 2 recommended to avoid meltymelty 2. Plug up a network cable to your AntMiner S3. Plug the other end of the cable up to your LAN or directly to antminer PC if your local network is set up on a different subnet - see below 2a. If your local network is not running on If your local network is running on Connect to antminer AntMiner S3 by going to your web browser and typing http: Configure your miner settings under the Miner Configuration tab, then save and apply the settings.

Go to the Network tab. Select "Edit" on the WAN line.

antminer s3 подключение

Set an appropriate hostname such as antMiner then click Antminer and Apply. You will now lose access to the device. If you had it connected to your network, check your router to find out what IP it now has. If you had it connected directly to your PC from having a different subnet, such as Log back in and confirm everything is working correctly. You should also feel a fair bit of warm air coming from подключение output end of the miner.

Похожие статьи:

  • Gtx 1060 aero itx 3g oc драйвер
  • Antminer l3 подключение
  • Antminer s3 майнинг
  • Antminer s3
  • Antminer s4 настройка
  • Antminer l3 litecoin miner 250mh

  • Рекомендуем почитать:

  • asic antminer u3 цена
  • калькулятор майнинга для antminer
  • antminer s9 обзор
  • - 2018 (c)